Maintaining skateboard bearings is one of the most important aspects of having a good skateboarding experience. Skateboards have an incredible number of parts and pieces, so there are many different things that can go wrong in between your board’s lifespan. One common problem is worn out or broken skateboard bearing lube. If you want to avoid replacing your entire set of bearings, then it would be best for you to invest in some high-quality lubricant that will keep your ride smooth and enjoyable for years to come!
Skateboard Bearing Lube Alternatives-
1. WD-40
2. White lithium grease
3. Petroleum jelly
4. Silicone spray
5. Beeswax and turpentine mixture
6. Oil-based lubricant
7. Dry bearing cleaner
8. Bearing spacers
9. Apply WD-40 to the bearings
WD-40
Skateboard Bearing Lube Alternatives-
WD-40 is a very popular choice of skateboard-bearing lube alternative for many riders. It has been used to lubricate everything from machinery to homes around the world, so it’s no surprise that it also works well on your bearings!
The best way to use this tool would be by spraying directly onto each individual bearing. This will allow you and other skaters alike an easy time replacing their worn-out parts due to ease of installation and removal. If WD-40 isn’t enough or doesn’t have what you need, then make sure that I cover some more alternatives below!
White lithium grease – One great thing about white lithium grease is its ability to last up.
White Lithium Grease
White lithium grease- One great thing about white lithium grease is its ability to last up. This can be explained by the fact that this lubricant consist of a blend of synthetic oils, and some natural waxes.
White lithium also has extremely low volatility meaning it won’t evaporate or degrade over time like other types of lubes due to its stability in high heat conditions. The downside to this type of bearing protection would have to be costly as it typically costs more than normal skateboard-bearing lube alternatives on the market today!
The best way for you and your fellow riders alike an easy time replacing their worn-out parts due to ease of installation and removal. If WD-40 isn’t enough or doesn’t have what you need, white lithium is a great option to have for your skateboard bearings.
Petroleum Jelly
The best way for you and your fellow riders alike an easy time replacing their worn-out parts due to ease of installation and removal. If WD-40 isn’t enough or doesn’t have what you need, white lithium is a great option to have for your skateboard bearings.
Another excellent alternative would be petroleum jelly which has been found to work well in the past as mentioned by some other skateboarders who use it on occasion when they don’t feel like picking up another canister of White Lithium bearing lube from Amazon Prime!
Skateboards are made with urethane wheels that need lubrication so that they roll smoothly without too much resistance or friction. The most common type of wheel grease used today is a bearing lube.
Skateboard bearings need a type of lubricant that will help keep them rolling smoothly without too much resistance or friction. The most common type of wheel grease used today is a bearing lube.
This can be either petroleum jelly, WD-40, White Lithium Bearing Lubricant, or some other kind if you want to get creative! One key thing to note however is that skateboards are made with urethane wheels and not metal so they won’t work well with silicone-based oils like engine motor oil for instance which makes it difficult to find the right viscosity when trying this method out.
You may also encounter more problems because the rubber in the wheels could react poorly as some people have.
Silicone Spray
A really popular alternative to skateboard-bearing lube is a silicone spray. The idea of using this kind of lubricant is that it will create a thin layer on the ball bearings, and because it can be sprayed directly onto them from any angle you come in contact with, no mess!
This type of product also has less chance of leaving residue on your skateboard making for an easier clean-up process after skating. It doesn’t contain any harmful chemicals which means you don’t need to worry about inhaling anything potentially toxic when spraying this either.
-Skateboard bearing lube alternative: Silicone Spray
-How does Silicone Spray work?
-It creates a thin layer on the ball bearings
– Leftover residue is easy to clean off
-It doesn’t contain any harmful chemicals (doesn’t need to worry about inhaling anything toxic)
-Safe for skateboard use, not just bearings.
How can I make my own?
If you want a more natural alternative that is cheap and easy enough to put together at home then this could be the option for you! All it takes is some silicon spray in one bottle and olive oil or vegetable oil in another, mix them up and store them separately until needed. It’s important not to shake the bottles too much as this will prevent your mixture from being uniformed with air bubbles. You also don’t have to worry about cleaning up.
Beeswax And Turpentine Mixture
A natural alternative to skateboard-bearing lube is a beeswax and turpentine mixture. This does not require any major cooking skills or equipment, just some basic ingredients that you may even have in the kitchen already.
Beeswax can be found at most craft stores either in bar form which must be grated with cheesecloth or as pellets which are more convenient for melting. The one thing it needs to melt properly is an additional ingredient: turpentine, otherwise known as paint thinner (although I recommend using something like Zippo lighter fluid).
Simply combine these two ingredients together over medium heat until they reach 150 degrees Celsius then pour into a container and let cool before use!
Oil-Based Lubricant
You can use an oil-based lubricant like WD-40, or even cooking oils such as olive and vegetables. These are all good for skateboard bearings because they do not evaporate when exposed to the air like grease does (which is why it’s best to keep a small container of the stuff on hand).
If you’re using this type of lubricant, make sure that you only put it on one side of the bearing so that your wheels won’t be too oily. You can also use an old toothbrush to scrub down both sides with some soap and water after every ride just in case it gets dirty, which will prolong its lifespan.
A lot of people don’t know about these types of items but they are really awesome when it comes to lubricating skateboard bearings.
Dry Bearing Cleaner
If you have a bearing that has become dry, don’t worry. There are some things that you can do to fix it and get your bearings running again without having to buy a new one.
The first thing I recommend is getting some WD-40 or cooking oils such as olive or vegetable oil. These types of lubricants won’t evaporate in the air like grease does (which is why they’re best for skateboard bearings).
Be sure to only put this type of lube on one side of the bearing so your wheels won’t be too oily. You can also use an old toothbrush with soap and water after every ride just in case it gets dirty which will prolong its lifespan. A lot of people don’t know this but you can also put a little bit of soap and water on the other side to make your bearings last even longer.
The best skateboard-bearing lube alternative is dry bearings with WD-40 or cooking oils as they won’t evaporate in the air like grease does (which is why they’re best for skateboard bearings).
Be sure only to use these types of lubricants on one side of the bearing so your wheels don’t become too oily. You can also get an old toothbrush with soap and water after every ride just in case it gets dirty which will prolong its lifespan. A lot of people don’t know that you can also put a little bit of soap and water on the opposite side as well.
Bearing Spacers
A bearing spacer is an object used in skateboarding to increase the distance between two bearings on a wheel.
This allows for more space and less friction when turning, which can create smoother turns with quicker response time. Spacers also help keep your wheels from nudging into things like curbs or rails while you’re skating downstairs, too!
The most common spacers are typically made of plastic material that’s designed to provide enough traction so it doesn’t slide around easily – but not too much grip as to affect the spinning of the wheel itself.
They come in different widths and thicknesses, so there’s plenty of options out there depending on how picky you want to be about specific characteristics. If you have multiple sets.